Panasonic AVC ULTRA AJ-UPX36OED Operating Instructions Manual page 80

[CH4 LEVEL CONTROL]
The recording level can be manually adjusted when [CH4 LEVEL] adjusting the recording level of the audio channel 4 is set to [MANUAL].
The items that can be set are as follows.
f [0]...[100]
(Factory setting: [70])
[CH1 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 1.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH2 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 2.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH3 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 3.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH4 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 4.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH1 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 1 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH2 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 2 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH3 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 3 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH4 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 4 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[HEAD ROOM]
Sets the headroom (standard level).
The items that can be set are as follows.
f [12dB], [18dB], [20dB]
(Factory setting: [20dB] (when [AREA SETTINGS] is [AREA 1]/[AREA 2]/[AREA 3]), [18dB] (when [AREA SETTINGS] is [AREA 4]))
[OUTPUT SETTINGS]
[AUDIO OUT]
Sets the audio channel and the format to output from the <AV OUT> terminal, the headphone terminal, and the built-in speaker.
[CH1]
[CH2]
[CH1/2 STEREO]
[CH1/2 MIX]
Chapter 4 Operation — Menu settings
Outputs the signal for audio channel 1 as monaural.
Outputs the signal for audio channel 2 as monaural.
Outputs the signals of the audio channel 1 and the audio channel 2 as stereo. Outputs as monaural from the built-in speaker.
Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural.
– 80 –