Table of Contents
Advertisement
A
B
C
D
E
A. Training Pads Connector Socket —
Receptacle for the training pads connector plug.
B. Pads Connector LED — Flashes to indicate
the socket location when device is turned on.
Inserted pads connector plug covers the LED,
which stops flashing when connector plug is
properly seated.
C. Remote Control Receiver Window —
Receives signals from the optional remote
control.
D. Speaker — Delivers voice instructions from
the AED Trainer 3. Speaker volume can be
adjusted with the remote control or set in the
device configuration.
E. Connector — For future use.
F. Green Ready Light — Illuminates when the
AED Trainer 3 is turned on; flashes when device is
receiving commands from the remote control;
stays off when the device is not in use.
F
G
H
I
AED TRAINER 3 USER INTERFACE
K
J
G. Infant/Child Key Port — Receptacle for the
Training Infant/Child Key. When Key is inserted,
the AED Trainer 3 operates in Infant/Child mode
to simulate defibrillation of an infant or child
under 8 years old or 25 kg (55 lbs).
H. Green On/Off Button — Turns on the AED
Trainer 3 and starts voice instructions.
I. Orange Shock Button — Controls delivery
of simulated shock. The button flashes when a
shock is advised during a scenario.
J. Battery Compartment — Contains the four
replaceable AA size alkaline batteries (not
provided) used to power the AED Trainer 3.
K. Operating System Card — Contains the
Trainer operating system, all voice commands, and
device configuration. The Operating System Card
must be installed in the AED Trainer 3 to use the
device.
Advertisement
Table of Contents
