Acer 4X QDR InfiniBand switch module
Item
Description
1
System error. Fault LED (Red)
2
System status. Ready LED (Green)
3
External InfiniBand Port (16 QSFP ports for Q3636 and 18 QSFP ports for Q3618)
4
Per Port Dual-color LED, PHY link(Green)/Logic link(Amber)/ACT blinking(Green+Amber)
5
Module Release Handle
6
Port Numbers (First port number is top port, second port number is bottom port)
7
QDR Switch Reset Button
*
If the fault LED goes on, the QDR switch operation is stopped. It then needs a hardware reset or a power off
cycle to bring it back into normal operation.
†
If the Green LED is blinking, the QDR switch is overheated. Please check the air fan and vent condition. If the
fault LED goes on at the same time, a hard reset or a power off cycle needs to be initiated.
22
*
†
Chapter 4