Hitachi HF-W2000 58 Instruction Manual page 52

Name
LAN port
(1000BASE-T/100BASE-TX/
10BASE-T)
Table 1-1 Function of each part (3/5)
You can connect a LAN cable to the LAN port. (See 5.8.1 Connector
specifications.)
Onboard LAN
Lamp
Lit in green A link is established. Both the equipment and the remote
device are powered up and the connection over the twisted-
pair Ethernet cable is stable.
Off No link is established:
• The equipment is not physically connected to the network.
• The switching hub is not powered up.
• The connection over the twisted-pair Ethernet cable is not
stable.
• The driver settings contain one or more errors.
Blinking Network data is being transmitted or received. The blink
green interval changes depending on network traffic.
Lamp
Lit in orange The link is established at 1000 Mbps.
Lit in green The link is established at 100 Mbps.
Off The link is established at 10 Mbps, or no link is established.
1-9
Function
ACT/LINK lamp
Status
Communication speed lamp
Status
1. GETTING STARTED
Communication speed lamp
ACT/LINK lamp