4.
5.
5.1
5.2
6.
7.2.6
Parameterization and pin assignments of the RJ45 interface
The RJ45 interface is used for connecting an encoder to the device with the relevant
configuration of the 3TK2810-1. With the appropriate transfer cable (see accessories), the
interface can also be used to parameterize another device using the copy function. This is
important if the speed monitor is to be used in a standard application, or if it has to be replaced
in the event of a fault.
Figure 7-1
7.2.7
Copying parameters
The parameters can be copied by linking two speed monitors using the transfer cable.
3TK2810-1 safety-related speed monitor
Equipment Manual, 05/2020, NEB926246402000/RS-AE/007
Factory settings
Parameters
Display settings
Parameters + display settings
ESC
Changes
Lock changes
Activate
ESC
Change tracking
Activate
ESC
About 3TK2810-1
ESC
Pin assignments of the RJ45 interface
Operation
7.2 Parameterizing/configuring
OK
OK
OK
OK
55