Adjusting The Screen Backlight - Sony LocationFree LF-X11 Operating Instructions Manual

Connecting via a wired LAN
After finishing the home wired LAN setup,
connect the Monitor to an Ethernet port on the
wall or on a router with a LAN cable (not
supplied).
Note
Depending on the performance of your router or hub,
when watching TV or video via wired LAN, the
Monitor may not be able to communicate correctly and
other devices connected to the Internet may be
adversely affected. When connecting by wired LAN,
be sure to use a 10/100BASE-T router or hub.
Connect the Monitor wirelessly again
The Monitor is automatically set to Wireless
Home mode whenever you disconnect the LAN
cable (not supplied).
Adjusting the
Screen Backlight
You can adjust the backlight of the screen. This
operation changes the backlight for all screens.
1
Open the [Settings] window and select
[Backlight].
The [Backlight] window appears.
2
Adjust the backlight and select [Back].
Move the slider or select [-] or [+] to adjust
the backlight.
Adjust the brightness.
Setting When [-] is
item selected
Backlight Darker
The [Settings] window is restored.
3
Select [Exit].
[Back]
When [+] is
selected
Brighter
61