Labeling A Disc; Protecting A Disc; Locking A Bd-Re/Bd-R - Sony HES-V1000 Operating Instructions Manual

Shows if the disc contains folders (BD-RE, BD-R only).
I Disc settings
◆Example: Display for a DVD-RW
Disc Information
Disc Name
Media DVD-RW
Title Total 2
Rec Date 7/13/2007
Recordable
Time
Remaining
A Disc Name
B Media
C Title Total
Original title total/Playlist title total*
* for DVD-RW (VR mode), DVD-R (VR mode) only
D Rec Date
Most recent and the oldest dates.
E Recordable Time
• Possible continuous recording time
Disc information may not be correct if the disc is recorded on other
devices.
F Format
Format: Indicates the recording format (VR or Video mode) for
DVD-RW and DVD-R.
G Disc settings
Selectable items vary depending on the disc type. See pages 35 for
details.
• Name Input
• Protect (write-protect)
• Finalize
• DVD Menu (DVD only)
• Format
H Remaining
• Bar indicator for disc capacity
• Disc's remaining capacity/total capacity
Disc information may not be correct if the disc is recorded on other
devices.

Labeling a disc

Name or rename the disc using the Disc Information display.
a On the Disc Information display, select
[Name Input] and press ENTER.
The on-screen keyboard appears.
b After entering the disc name, select [Finish]
and press ENTER.
See page 90 for character input.
Note
You cannot label a disc if the disc is finalized.

Protecting a disc

Protect important discs against accidental erasure and alteration.
34
Close
Name Input
Format Video
Finalize
DVD Menu
XP : 0H59M SP : 1H59M Format
LP : 4H01M EP : 5H56M
4.4/4.7GB
Finish
RETURN
a On the Disc Information display, select
[Protect] and press ENTER.
The protection display appears.
Protect
Set protection for this disc.
On
b Select [On] and press ENTER.

Locking a BD-RE/BD-R

Set a password to control playback of recordable BDs.
a On the Disc Information display, select
[Lock] and press ENTER.
The lock display appears.
Disc Lock Settings
Currently the disc is not locked.
Do you want to set a password and lock the disc?
Yes
b Select [Yes] and press ENTER.
The password display appears.
Set Password
The disc will be locked so the content cannot be
viewed. Set the password required to operate.
- - - -
Operation will not be possible if you forget the
password.
c Enter a password using the number buttons,
select [OK], and press ENTER.
After you remove the disc, the disc will become
unplayable without the password.
To unlock, repeat the steps and select [Yes] in step 2.
Notes
• You will need the password for playback as well as for unlocking the
disc.
• Do not forget the password, as the password setting cannot be cleared
without the password.
• Do not forget the password. The password will be required when you
play the locked BD-RE/BD-R again on the server.
• When [Standby Mode] is set to [Standard], the disc may play without
the password if you turn off the power after unlocking the disc.
Off
No
OK
Cancel