KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
8 Installation Instructions
8.1.
Installation
8.1.1.
Installation Space
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
• Avoid excessive heat or humidity.
• Use the unit within the following ranges of temperature and humidity.
• Ambient temperature: 10°C to 32.5°C
• Relative humidity: 20% to 80% (without condensation)
• Power cord length should be less than 5 meters. Using a longer cord may reduce the voltage or cause malfunctions.
• Avoid direct sunlight.
• Do not install near devices which contain magnets or generate magnetic fields.
• Do not subject the unit to strong physical shock or vibration.
• Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
• To protect the unit from damage, hold both sides when you move it.
• Do not place the unit in an area where the paper tray may be obstructed (i.e., by a wall, etc.)
• Keep this surface (1) away from walls etc. more than 100 mm to let the unit cool down.
94