1MRS758458 F
Section 8
8.1
8.2
ARR600
User Manual
Service configuration
Configuring services
1.
In the left pane, click Services.
The service categories are listed under Services.
2.
Click a service category.
3.
Configure the service with the service parameters listed in the view.
4.
Click Submit to save the settings.
Service parameters
Table 11:
Common
Name
Description
Common
Services
Use DNS
Determines if the device acts as a DNS server for LAN devices
Proxy
LLMNR
The link-local multicast name resolution is a protocol that
responder
enables machines on LAN to find the device using its hostname.
By default, the device uses its hostname (for example,
arctic-02xxyy).
mDNS
The multicast domain name system is a protocol that enables
responder
Mac® OS X® machines on LAN to find the device using its
hostname (for example, arctic-02xxyy).
SSH Server
The SSH (secure shell) is an encrypted network protocol for safe
remote command line connections. It is replacing the Telnet
protocol.
SSH Server
Determines if logging into the device using SSH is allowed. The
device has internal SSH server, which allows incoming SSH
connections when enabled. By default, the SSH service is
enabled for LAN connections.
SSH protocol
Selects which SSH protocol versions are enabled in SSH
version
Server. It is recommended to allow only SSH protocol version 2
(SSH2) to be used.
SSH public
SSH Public keys can be added for remote logins with SSHkeys.
keys
Section 8
Service configuration
Value range
No, Yes
No, Yes
No, Yes
No, Yes
SSH1, SSH2
33