Displaying Connection status
You can call up the current connection
status of your dishwasher.
Select the
Connection status
option and confirm with OK.
Use the sensors to consecutively
call up the Wi-Fi signal strength, the
name of your router, and the
associated IP address.
Select OK to confirm the messages.
Set up again
This menu option only appears if you
have connected your dishwasher to
your Wi-Fi network before.
Connect using App
Select the
Connect using App
option and confirm with OK.
Follow the instructions in the App.
Connect using WPS
Select the
Connect using WPS
option and confirm with OK.
Follow the instructions in the display.
Network configuration
You can use this menu option to reset
all Wi-Fi module settings (if available) to
the factory default settings.
menu
The network configuration should be
reset whenever a dishwasher is being
disposed of or sold, or if a used
dishwasher is being put into operation.
This is the only way to ensure that all
personal data has been removed and,
in the case of the latter, a previous
owner will no longer be able to access
the dishwasher.
Remote control
This menu option will only be
displayed if you have connected your
dishwasher to your Wi-Fi network (see
menu
"Settings - Miele@home").
If you wish to permanently switch off
the
Remote control
this under this menu option. The
sensor will then no longer be
menu
available to select until you change this
setting again.
Even if the
switched off, you can use the
Miele@mobile App to call up
information about your appliance.
However, you cannot start any
programmes or change any settings
from it.
Settings
option, you can do
Remote control
option is
103