Lan Link/Act Lamp (Lan0, Lan1, Or Lan2); Displayport Connectors (Display1 And Display2); External Contact Connector (Ext); Usb 3.0 Ports (Usb1 And Usb2) - Hitachi CE50-10 Instruction Manual

2.1.12 LAN LINK/ACT lamp (LAN0, LAN1, or LAN2)
This lamp indicates the link status and communication status of the LAN.
Table 2‒7: LAN LINK/ACT lamp (LAN0, LAN1, or LAN2)
Lamp
Solid green
Blinking green
Off
2.1.13 DisplayPort connectors (DISPLAY1 and DISPLAY2)
These connectors are for connecting cables from display devices.
2.1.14 External Contact connector (EXT)
This connector is used as a general-purpose contact I/O interface.
2.1.15 USB 3.0 ports (USB1 and USB2)
These connectors are for connecting USB devices.
Indicates that a link has been established.
Indicates that network data is being sent or received. The blinking interval varies depending on the
network traffic.
Indicates that a link has not been established.
2. CE50-10 Names and Functions of Parts
Description
15