Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
RTS Length (256-2346)
Fragment Length (256-2346)
Channel Width
LAN
On the LAN tab, you can configure STP (Spanning Tree Protocol). The Spanning Tree Protocol
eliminates loops caused by redundant paths.
STP (Spanning tree): Enable this function for access points having multi-LAN ports.
Once the settings are updated, the configuration must be uploaded to the access points. See
Profile Settings for more information.
WLAN Partition
The WLAN Partition page displays the wireless partitioning settings that allows you to enable
or disable communication among clients within the same SSID or across different SSIDs.
Advanced wireless settings can also be configured based on the 2.4GHz or 5GHz frequency
band. Navigate to Configuration > Profile Settings > [Site] > [Network] > WLAN Partition.
Internal Station
Connection
applied to other band frequencies.
Enter the RTS length value. The default value is 2346.
Enter the fragment length value. The default value is
2346.
Select the channel width used by the network.
For 5GHz, 20MHz, Auto 20/40 MHz, and Auto
20/40/80/160 MHz are available. For 2.4GHz, 20 MHz
and Auto 20/40 MHz are available.
Select Enable to permit within-SSID and across-SSID communication.
Select Disable to prevent within-SSID but permit across-SSID
communication.
Select Guest Mode to prevent within-SSID and across-SSID
communication.
71
AP Network
Advertisement
Table of Contents
