Table of Contents
Advertisement
SNTP
The DWL-P1012 is capable of updating the system time using the Simple
Network Time Protocol. When a valid DNS Server address is configured the
DWL-P1012 can resolve DNS names for time servers prior to synchronization.
From the SNTP configuration page of the Web UI, select SNTP Server Setting
to manage the list of NTP servers used to synchronize. Select SNTP Time
Zone & DST to configure the Time Zone the midspan is located in and enable
Daylight Savings Time if desired.
To add a time server IP or DNS name, click 'Add Server.'
Server IP: Enter an IPv4 address or Fully Qualified Domain Name of a time
server with which the midspan will update. Click 'Apply' to save.
To remove a time server from the list, click 'Delete Server.'
Check the checkbox of the time server you would like to remove from the list.
Click 'Apply' to save.
31
Advertisement
Table of Contents
