Kenwood DDX396 Instruction Manual page 21

SiriusXM® Satellite Radio SiriusXM® Satellite Radio
1 Displays/hides other available operation keys*
2 Selects the band (SXM1/SXM2/SXM3/SXM4)
3 Channel number
4 Text information
• Touching [ ] scrolls the text if not all of the text
is shown.
• Touching [Song Title]/[Info]/[Category]
switches the information.
5 Displays the preset channel window
• To hide the window, touch [
6 [P1] – [P5]
• (Touch) Selects a preset channel.
• (Hold) Presets the current channel.
7 Playback status and time code for the buffered data
and replay mode
• The time code shows you the point in the Replay
buffer you are listening to. (E.g. "–5:00" means
that you are listening to audio that is 5 minutes
behind the current broadcast.)
8 Replay time bar for replay mode
• Black: The remaining capacity
• Blue: The amount of buffered contents
9 Signal strength indicator
p Seek mode indicator
q Operation keys*
* See the following "Operation keys on source control screen".
Operation keys on source control screen
• See also "Common operation keys on source control
screen" on page 8.
Touching the operation keys performs the following
actions:
1
[MODE]
].
[ ]
[ ]
[ ]
[SEEK]
[SCAN]
S T
[ ]/[ ]/
[Live]
[ ]
Displays the <SiriusXM Mode>
screen.
(Hold) Registers the current artist to
the alert contents.
(Hold) Registers the current song to
the alert contents.
Activates or deactivates the content
alert for traffic and weather.
Changes the seek mode for [CH J ]/
[CH K ].
• SEEK1 (Initial): Skips to another
available channel.
• SEEK2: Skips to another preset
channel.
Starts TuneScan™.
Performs playback operations during
content replay.
Changes the page in the window to
display other operation keys.
q
[ ] Displays the <Channel List> screen.
[ IW ] Starts/pauses the content replay.
[CH J ]/[CH K ] Selects the channel.
• To select a channel, make sure
"SEEK1" is selected as the seek
mode.
• To select a preset channel, make
sure "SEEK2" is selected as the seek
mode.
Selecting a channel on the list
You can obtain information on channels or select a
channel to listen to.
1
Display the <Channel List> screen.
On the source control screen, touch as follows:
2
Select a category ( 1 ), and then select a
channel ( 2 ).
Channel List
Channel
All Channels 100Ch Channel Name
Category Name 1 105Ch Channel Name
Category Name 2 110Ch Channel Name
Category Name 3 115Ch Channel Name
Category Name 4 120Ch Channel Name
ENGLISH 19