Port - D-Link DCS-1110 User Manual

Section 3 - Configuration
Web Port:
This is the port that allows the user to
connect to the camera's user interface.
By default the port is set to 80. You may
change the port number if using multiple
cameras.
Note: If your wish to enable remote
viewing of your camera, you MUST
also set up your router/gateway for Port
Mapping. Please refer to your router's
instruction manual on how to open up
ports. For additional help on configuring
your camera to work with your router,
please refer to the next section on setting
up your camera for use with a router. For
installing multiple cameras, ONE port per
camera must be opened on your router,
the Web server (HTTP) port.
This is the port that allows the user to
AV Control

Port:

connect to the camera and synchronize
the audio and video. By default the port
is set to 5000. You may change the port
number if using multiple cameras.
This is the port used to stream video. By default the port is set to 5001. You may change the port number
AV Streaming
Port:
if using multiple cameras.
D-Link DCS-1110 User Manual
Port
37