D-Link DGS-1510-10L/ME Hardware Installation Manual page 12

DGS-1510/ME Series Metro Ethernet Switch Hardware Installation Guide
•
Supports D-Link SafeGuard Engine.
•
Supports DHCP Server Screening
•
Supports DHCP client filtering
•
Supports ARP Spoofing Prevention.
•
Supports BPDU Attack Protection
•
Supports DoS Attack Prevention.
•
Supports L3 Control Packet Filtering
•
Supports IEEE 802.1X Port-based and Host-based Access Control
•
Supports MAC-based Access Control (MAC)
•
Supports Guest VLAN
•
Supports Microsoft® NAP -- IPv4, 802.1X NAP, and DHCP NAP
•
Supports Authentication for Mgmt. Access(Local, TACACS, XTACACS, TACACS+, and RADIUS database)
•
Supports User Account Privilege for Management Access
•
Supports Authentication Database failover
•
Supports Trusted Host
•
Supports Zone Defense
•
Supports IEEE 802.3ah Ethernet Link OAM
•
Supports IEEE 802.1ag Connectivity Fault Management (CFM)
•
Supports Cable Diagnostics
•
Supports Optical Transceiver Digital Diagnostic Monitoring (DDM)
•
Supports D-link Unidirectional Link Detection (DULD)
•
Supports Port Status, Device Status, Traffic, Switch Performance Monitoring
•
Supports Accessibility using multiple interfaces like the Command Line Interface (CLI), Web User Interface
(Web UI), and more.
•
Supports Telnet Server and Client from IPv4
•
Supports Trivial File Transfer Protocol (TFTP) Client.
•
Supports File Transfer Protocol(FTP) client
•
Supports Simple Network Management Protocol (SNMP) version 1, 2c, and 3. Also supports SNMP Traps.
•
Supports System Log
•
Supports Trap/ Alarm/ Log Severity Control.
•
Supports Simple Mail Transfer Protocol (SMTP)
•
Supports Simple Network Time Protocol (SNTP).
•
Supports Link Layer Discovery Protocol (LLDP) and LLDP Media Endpoint Discovery (LLDP-MED)
•
Supports Microsoft® NLB (Network Load Balancing)
•
Supports Gratuitous ARP.
•
Supports BootP/DHCP Client.
•
Supports DHCP Auto-configuration
•
Supports Dynamic Host Configuration Protocol (DHCP) Relay.
•
Supports PPPoE Circuit Insertion.
•
Supports IEEE 802.3az compliance
•
Supports Standard MIBs like MIBII, Bridge MIB, SNMPv2 MIB, RMON MIB, RMONv2 MIB, Ether-like MIB,
802.3 MAU MIB, 802.1p MIB, RADIUS Authentication Client MIB, Ping & Traceroute MIB.. , and D-Link
Private MIBs.
7