Installation Guide (continued)
安裝指南(續)
The base plate is placed on the packaging foam on the top of the washer.
1
Lay the unit down slowly.
Lay the unit down on some corrugate paper to prevent damage.
Back
The water drainage
hose
Screw
2
Align the hook on the base plate with the square hole on the chassis and insert it, then
tighten the screw.
Back
Screw
12
Installation of the base plate
(Suitable in AJ-S75TX
AJ-S75TX
Front
Corrugate paper etc.
(Suitable in AJ-S75TXP, AJ-S70TXP)
Front
Corrugate paper etc.
, AJ-S70TX )
, AJ-S70TX
AJ-S75TXP, AJ-S70TXP