Epson l300 User Manual page 81

Lights
1
power
2
paper and ink
Light status
The power light is on
The power light is flashing
The power light is flashing
The paper light is flashing
The power light is flashing
The paper light is on
The power light is on or
flashing
The ink light is flashing
The power light is on or
flashing
The ink light is on
Condition/solution
The product is turned on.
The product is busy. Wait for the
turning off the product.
If you just filled the ink, the
minutes. Do not cancel this process.
Paper is jammed in the product. Remove the jammed paper, and press
the stop button to clear the error.
No paper is loaded or multiple sheets fed at one time. Load paper in the
product, and press the stop button to clear the error.
Ink level may be low. It is nearly time to reset the ink levels by refilling
the ink. You can continue printing, but you should prepare new ink
bottles. To confirm the actual ink remaining, visually check the ink levels
in the product's ink tanks.
Ink level may have reached the lower line of the ink tank and it is time to
reset the ink levels. To reset the ink levels, refill the ink.
Caution: Continued use of the product when the ink level is below the
lower line on the ink tank could damage the product.
81
power light to stop flashing before
power light will flash for approximately 20