Table of Contents
Advertisement
-
Upload directory : Specify the FTP path where you will transfer the alarm
images.
-
Port : The default port of the FTP server is 21; however, you can use a different
port number according to the FTP server settings.
-
Passive mode : Select <On> if you need to connect in passive mode due to the
fi rewall or the FTP server settings.
E-mail confi guration
-
Server address : Enter the IP address of the email server that you use for the
email transfer.
ex) SMTP. hotmail. com
-
Use authentication : Select whether to use authorization.
-
User ID : Enter the user ID for logging into the email server.
-
Password : Enter the user account password for logging into the email server.
-
Port : The default port of the email server is 25; however, you can use a different
port number according to the email server settings.
-
Recipient : Enter the address of the email recipient.
-
Sender : Enter the address of the email sender. If the sender address is incor-
rect, the email from the sender may be classifi ed as SPAM by the email server
and thus may not be sent.
-
Subject : Enter a subject for your email.
-
Body : Provide the text for the massage. Attach the alarm images to the email
that you are preparing.
4.
When done, click [Apply (
SD record
You can set the record conditions or the use of recording for the SD memory, check the
size of stored data, or format the SD memory itself.
Only SD memory contents in channel 1 can be played. Channels 2 through 4 do not support SD memory
recording or playback.
1.
From the Setup menu, select the
<Event (
)> tab.
2.
Click <SD record>.
)].
English _53
Advertisement
Table of Contents
