D-Link DWL-6610AP Quick Installation Manual page 4

Mounting Using Anchor Screw
Installation
1. Place the plastic wall-mount ring on a
wall or ceiling.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
3. Drill holes in the marked points and
insert the plastic wall anchors.
4. Use the supplied screws to attach the
mounting ring to the wall.
4  D-Link DWL-6610AP Quick Install Guide
5. Attach the Access Point to the mounting ring.
6. Twist to lock the Access Point onto the ring.
7. Plug the CAT 5 cable into the LAN
port on the Access Point.