Bosch ACS 553 Service Manual page 29

ACS 553, ACS 563 Service Manual
8. If the amount of refrigerant is sufficient
to charge the system to completion, the
display will show hoses compensation a
few seconds and then close coupler valves
and disconnect service hoses from vehicle.
The charge is complete:
9. Select OK icon then the unit will begin a
hose clearing process to remove refrigerant
from the hoses, followed by a short recovery.
10. At the end unit shows the charged data and
print out option.
Robert Bosch GmbH
Diagnostics and Testing
11. If the charge was cancelled, Charge
complete will change to Charge cancelled
and the values on the display will disappear:
12. Select OK icon to exit.
13. The unit will begin a hose clearing process
to remove refrigerant from the hoses,
followed by a short recovery.
Charge is complete.
29
1 689 975 295 2021-04-13