Components Of The E8000E-X8 - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l

3.2 Components of the E8000E-X8

This section describes the components of the E8000E-X8.
The E8000E-X8 has an integrated chassis,
components of the E8000E-X8.
Issue 01 (2012-11-07)
Unblocked switching network that can be upgraded, with switching capacity at the Tbit/s
level
Distributed hardware-based forwarding and fast service deployment
Compact structure to increase interface density
Normalized design of system components
Separation of the control channel, service channel, and monitoring channel to ensure non-
blacking control channels and monitoring channels
Carrier-class high reliability and manageability
Shielding at the modular level to meet Electro Magnetic Compatibility (EMC) requirements
Hot swappable boards, power modules, and fans
U-shaped air channels to improve system heat dissipation
Distributed power supply to enhance power supply capabilities for a single chassis
200-mm fans with a PFU
SRUAs in 1:1 backup mode
SFUs in load balancing mode
Backup for key components such as power modules, fan modules, clocks, and management
buses
Protection against incorrect insertion of boards
Queries about alarm prompts, alarm indications, running status, and alarm status of the
voltage and ambient temperature
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 E8000E-X8 Chassis Overview
Figure 3-2 shows the architecture and main
37