Canon imageCLASS MF6500 Series Basic Manual page 133

3
Close the platen glass cover.
CAUTION
Be careful not to get your fingers caught.
● ADF
If your documents have black streaks or
appear dirty after copying them using the
ADF, this may be caused by pencil lead
rubbing off the documents and onto the
roller. Clean the ADF scanning area, film,
and roller.
1
Turn off the main power switch
and disconnect the power cord.
2
Open the ADF.
3
Clean the rollers (A) inside the
ADF with a cloth dampened with
water. Then wipe the area with a
soft, dry cloth.
NOTE
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.
4
Lift the document feeder tray.
5
Clean the rollers (B) below the
document feeder tray with a
cloth dampened with water.
Then wipe the area with a soft,
dry cloth.
A
B
11-6