Table of Contents Introduction Page Understanding the GO Wireless Logger Page Operating Range Page Activating GO Wireless Loggers Page Logger Placement Scenarios Page Regulatory Approvals Page GO GreenSense™ Program Page Lithium Battery Exemption Page Technical Specifications Page Technical Support Page...
Introduction GO Wireless Loggers are flat, compact in size and digitally record the time and temperature of a perishable product’s environment during storage or in-transit. Easy to use in combination with the AutoSense™ Gateway, loggers do not require ongoing calibration to maintain accuracy. Loggers have the capability to measure ambient air temperature and are also equipped to take a surface read of the object to which they are attached, providing a more accurate assessment of actual product temperature.
Note that each logger is sealed in a waterproof plastic pouch. Emerson GO Wireless Loggers can be used in almost any environment, including fully emerged in liquid.
Operating Range Specified operating range for GO Wireless Loggers is -20°C to 60°C (-4°F to 140°F). Activating GO Wireless Loggers • Activate the logger by pressing and holding the green “Press & Hold” button in the lower right- hand corner of the logger for 3 seconds; green and amber LEDs will flash in a sequence to indicate successful activation.
Pallet Level - Many customers apply loggers to the side of a pallet. Emerson provides signage and clear plastic pouching to facilitate locating loggers on pallets at the receiving end as depicted in the photo to the right.
Regulatory Approvals Model: PSUWL01F; FCC ID WPEPAKS-1A; IC: 8031A-UW1A Model: UWL02G; FCC ID: WPEUWL02G; IC: 8031A-UWL02G This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
GO Wireless Loggers can be easily recycled through the GO GreenSense program. GO GreenSense is a recycling program that facilitates the return of Emerson temperature monitoring loggers for proper battery and component recycling. Through the GO GreenSense program, Emerson provides customers with eco-friendly return boxes and pre-paid postage return labels free of charge.