Step by step
p
Enter the type of call forwarding wanted:
qee
1.
qeh
2.
p
Enter the call forwarding destination number.
khd
1.
khe
2.
khf
3.
khg
4.
w
Wait for a confirmation tone.
t
Replace the handset.
Conditional
Incoming calls can be forwarded to a specified destina-
tion list, as configured in a TAPI-type application such as
a Windows TAPI Browser. The settings of the previous
list or unconditional call forwarding will be replaced with
the new list settings.
The following information is required for configuring a
list:
•
Incoming caller ID
•
Day of the week and time
•
Type of call (internal or external)
When more than one number have been specified for
incoming calls to an extension, the call forwarding prior-
ity will be:
1. Checks to see if the Caller ID for the incoming call
matches the number programmed for the extension
2. Checks to ensure that the Type of Call (internal or ex-
ternal) has been configured
3. Checks the time settings.
This feature is available when using a CTI (Com-
puter Telephony Integration) interface.
[1] The system allows up to 50 call forwarding numbers (see Program-
ming manual,Programming an extension - Conditional forwarding
limited by extension and external CFW).
Conditional call forwarding has priority over an unconditional call
forwarding.
Conditional call forwarding is not available for S
Functions used when receiving calls
- Direct (*11)
- No answer. (*14)
- FAX
- attendant (direct dialing to extension)
- Fax/DID
- Message
1
extensions.
0
51