Advertisement
To play, the steps are as follow:
1.
Execute the program memory
2.
Scan the
barcode.
SG
XEQ
The display will prompt you with
3.
Key in any integer number, and the scan ''BEGIN''.
4.
The display will prompt you with
0). Search for the submarine, moving the destroyer to any location on the grid by scanning the bar code for that position. You'll
hear the sonar pulse go out. If you're within range of the sub (within 2.5 leagues) you'll hear an echo, the higher the pitch the
closer the sub.
5.
Alternatively, you can ''DROP DEPTH CHARGES'' of check the ''STATUS'' to determine how many soundings you have
made and how many depth charges you have dropped.
Example:
Operation
Scan
SG
XEQ
Key in the integer seed 73,
then scan BEGIN
First move:
Scan 55
Since there was no echo, eliminate the shaded region below.
Second move:
Scan 22
Since a low pitch echo sounded, eliminate the area very close to the ship's location.
Third move:
Scan 20
Since a high pitch echo sounded, the sub is close. Scan DROP DEPTH CHARGES.
HP 82153A - Wand Owner Manual - page 54
command and load the program by scanning the bar code on
SIZE
.
SEED
nm where n is the row and m is the column of the last position scanned (initially
ORDERS?
Display
SEED?
ORDERS 0
SCANNING
ORDERS 55
SCANNING
CONTACT
ORDERS 22
SCANNING
CONTACT
ORDERS 20
BOOM
1 SCAN
3 SCANS
GOOD JOB
NEW GAME
ORDERS 0
(no echo)
(low pitch echo)
(high pitch echo)
page
61.
Advertisement
