Advertisement
Using electrical power
•
This product should be operated from the type of power indicated on the marking label. If you are not
sure of the type of power available, consult your dealer or local power company.
•
Do not allow anything to rest on the power cord. Do not locate this product where people will walk on
the cord.
•
If an extension cord is used with this product, make sure that the total ampere rating of the equipment
plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that
the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
•
Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system
load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not
exceed 80% of the power strip's input rating.
•
This product's power cord is equipped with a three-wire grounded plug. The plug only fits in a grounded
power outlet. Make sure the power outlet is properly grounded before inserting the power cord plug. Do
not insert the plug into a non-grounded power outlet. Contact your electrician for details.
Warning! The grounding pin is a safety feature. Using a power outlet that is not
properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with the
performance of this product.
•
Use the product only with the supplied power supply cord set. If you need to replace the power cord
set, make sure that the new power cord meets the following requirements: detachable type, UL listed/
CSA certified, type SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.5 meters (15 feet)
maximum length.
Advertisement
