Table of Contents
Advertisement
58/64
Technical data
Bosch Rexroth AG, Material and information fl ow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12
16 Technical data
• See the sales catalog for dimensions TS 2plus. 3 842 531 138 and TS 4plus
3 842 527 530.
• Max. section load:
• Max. load:
• Noise emission:
16.1 Ambient conditions
• The transfer systems have been designed for stationary use in a location that is
protected from the elements.
• Operating
+5 °C to +40 °C
temperature
–5 °C to +60 °C at 20% reduced load
• Storage temperature –25 °C to +70 °C
• Relative humidity
5% to 85%, non-condensing
• Air pressure
> 84 kPa corresponds to an altitude < 1400 m above sea level
• Max. load capacity of fl oor: 1000 kg/m
• At altitudes > 1400 m, the load values of the electric drives are reduced by 15%.
• Prevent mold, fungus, rodents and other vermin.
• Do not install or operate in the immediate vicinity of industrial equipment
producing chemical emissions.
• Do not install or operate near sources of sand or dust.
• Do not install or operate in areas that are regularly subjected to high-energy forces
caused by presses or heavy machinery, for example.
• Resistant to many media that are commonly found in manufacturing, such as water,
mineral oil, grease, and detergents. Contact your Rexroth representative if you have
any doubts about resistance to specifi c chemicals, such as test oil, doped oils,
corrosive detergents, solvents or brake fl uid.
• Avoid prolonged contact with highly reactive acidic or alkaline materials.
16.2 Pneumatics
• Oiled or non-oiled, fi ltered, dry compressed air.
• Operating pressure:
• Solids
– Particle size
– Particle quantity
• Humidity – water content
1
– Pressure dew point
)
1)
The pressure dew point should be at least 15 °C below ambient temperature.
• Oil content
– Oil quantity
2.0 kg/cm support length
(depending on the belt section used)
HQ 2/C-H
HQ 4
2
4 to 6 bar
≤ 5 µm
(Class 6 as per ISO 8573-1:2010)
3
≤ 5 mg/m
(Class 6 as per ISO 8573-1:2010)
≤ +3 °C
(Class 4 as per ISO 8573-1:2010)
3
≤ 1 mg/m
(Class 3 as per ISO 8573-1:2010)
240 kg
250 kg
< 70 dB (A)
Advertisement
Table of Contents
