NEC SL1000 Features And Specifications Manual page 462

SL1000
Set up Remote Inspection
1. Press Speaker+719 at Multiline terminal.
2. Dial Remote Inspection terminal number (1-6).
3. Dial 1 (set).
4. Dial Remote Inspection extension number, "200".
5. Dial Ringing start tine, "1200".
6. Dial ringing continue time, "03".
7. Dial Speed dial bin number to use, "999".
8. Dial emergency call destination number "xxx-xxx" and press Hold key.
9. Dial VRS message number when inspected extension answered, "001".
S
10. After beep tone, record the message and press # key.
11. Dial VRS message number when emergency call destination answered, "002".
12. After confirmation tone, record the message.
13. Press Speaker and finish recording.
To Cancel the Remote Inspection
1. Press Speaker+719 at Multiline terminal.
2. Dial Remote Inspection terminal number (1-6).
3. Dial 0 (cancel).
When answered the Remote Inspection ring
1. At 12:00 o'clock start ringing at extension 200.
2. When answered VRS message 1 is played.
3. After finishing VRS 1 message, the call is disconnected.
When Not answered the Remote Inspection ring
1. At 12:00 o'clock start ringing at extension 200.
2. Continue ringing over 3 minutes.
3. Stop ringing at extension 200 and place outgoing call automatically according to speed dial bin
999.
4. When destination answered send VRS message 2.
5. After finishing VRS message 2, destination person can automatically monitor through extension
200.
6. By pressing
1-454
key from outside it is possible to make both way talk.
*
ISSUE 1.0
Security