Operation BDL
14.2.3 Type Modbus
14.2.3.1 Selection and activation of the sensor type
First step: select a free sensor channel
Main menu Settings Sensor settings B3
Second step: select the Modbus type
Main menu Settings Sensor settings B3 Type text field Modbus
Third step: confirm with
Now, a
name
(see Chapter
Main menu Settings Sensor settings B3 VA Use
14.2.3.2 Modbus settings
Main menu Settings Sensor settings Modbus ID text field
Main menu Settings Sensor settings B3 Modbus Settings
54
OK
12.2.2.7 Marking and setting text
fields) can be entered.
Via Modbus, up to eight registry values
(from input or holding registers) of the sen-
sor can be read out.
Selection via the register tabs
activation by means of the respective
button.
Here the
Modbus ID
is entered which is
determined for the sensor, permissible val-
ues are
1 –
247, (ex. here
Setting of the Modbus ID at the sensor see
sensor data sheet.
Here, the serial transmission settings
drate, stop bit, parity bit, and timeout time
need to be defined.
Please refer to the data sheet of the used
sensor/transducer for this purpose.
Confirmation with
OK.
Resetting to the initial settings by means of
the
set to default
button.
Va –Vh
and
use
Modbus ID = 22)
bau-
METPOINT® BDL