Cigar Lighter (24 V Dc Electrical Outlet); Using Cigar Lighter; Ash Tray - Hitachi ZW 370-6 Operator's Manual

Cigar Lighter (24 V DC Electrical Outlet)

Using Cigar Lighter

d
WARNING: Never touch other than insulated the
knob part. Otherwise, it may result in severe burns.
IMPORTANT: In case the cigar lighter does not pop out
automatically after 30 seconds after pushing the cigar
lighter in, pull out the cigar lighter manually. Then,
consult the your nearest authorized dealer.
1. Turn the key switch (1) ON.
2. Press and release the lighter knob (2).
3. The cigar lighter knob will return to the original position
when the lighter becomes hot. Pull the cigar lighter out
to use.
4. After using the cigar lighter, insert the cigar lighter
into the panel until the knob is seated in the original
position and not pressed in.
d
CAUTION: Do not connect accessories that use
power other than 24 V DC (MAX. 5 A). Damage to the
batteries and accessories may result.
Do not use this socket to supply the power for a long
time without running the engine. The batteries may
be discharged.

Ash Tray

d
WARNING: Take precautions against fires.
Use this ash tray (3) when smoking in the cab.
OPERATOR'S STATION
1-117
2
1
1
3
MNEC-01-038
M4GB-01-089