DISASSEMBLING AND REASSEMBLING THE RSM
Disassembling the RSM before the one (1) year
limited warranty has expired will void the warranty.
Disassembling
1. Remove the battery cover by inserting a coin or
other thin object into the screw slot (See
Figure 2). Turn the screw counter-clockwise.
2. Remove the batteries.
3. Remove the two screws in the battery compart-
ment using a T8 Torx® driver.
4. Gently pull the front and back housings apart.
5. Gently pry the main board up from the hous-
ing using a small flat bladed screwdriver.
Refer to Figure 3 for placement of screw-
driver.
6. Lift the main board by gently grasping the
antenna and pivoting the board out of the
housing.
Reassembling
N
OTE:
When inserting the board into the hous-
ing, make sure that the switches do not
push the rubber actuators out of place
and that both are properly aligned to one
another, as shown in Figure 3
20