Room Ventilation - Miele 11 588 800 Operating And Installation Instructions

Heat-pump tumble dryer
Table of Contents

Advertisement

Installation
The screw feet can be adjusted to
compensate for unevenness in the floor.
This tumble dryer is not suitable for
building under.
Never block the ventilation slots on
the tumble dryer. Do not block the
gap between the bottom of the
tumble dryer and the floor with plinth
boards, deep pile carpet etc. which
could obstruct the openings. This
would hinder a sufficient flow of air
to the tumble dryer.
58

Room ventilation

- Air drawn in for use in the drying
process will be warm when it is
expelled back into the room by the
tumble dryer. You must therefore
ensure that the room is sufficiently
ventilated, particularly if the
appliance is located in a small room.
- Make sure that the room temperature
is not too high. If there are other heat
producing appliances in the room in
which the dryer is located, make sure
the room is well ventilated and switch
the other appliances off, if possible.
Otherwise running times and energy
consumption could be increased.

Advertisement

Table of Contents
loading

Table of Contents