Huawei B2368 User Manual page 68

LTE CPE B2368
User Guide
Label
IP Address
Subnet Mask
DHCP Server State
DHCP
DHCP Lease Time
IP Addressing Values
IP Pool Starting
Address
Pool Size
DNS Values
DNS Server 1-3
DHCP Relay State
Issue 03 (2019-01-31)
Description
Enter the LAN IP address you want to assign to your LTE Device in
dotted decimal notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your LTE Device
automatically computes the subnet mask based on the IP address you
enter, so do not change this field unless you are instructed to do so.
Select Enable to have your LTE Device assign IP addresses, an IP
default gateway and DNS servers to LAN computers and other
devices that are DHCP clients.
If you select Disable, you need to manually configure the IP
addresses of the computers and other devices on your LAN.
When DHCP is used, the following fields need to be set.
Set how long DHCP clients will own the IP address obtained from
the DHCP server.
For example, 0 Day 12 hour 0 Min (factory default).
The minimum DHCP Lease Time is 2 minutes, and the maximum
DHCP Lease Time is 31 Days.
This field specifies the first of the contiguous addresses in the IP
address pool.
This field specifies the size, or count of the IP address pool.
Select From ISP if your ISP dynamically assigns DNS server
information (and the LTE Device's WAN IP address).
Select DNS-Proxy to have the LTE Device send its own address to
the LAN clients for them to use as the DNS server.
Select User-Defined if you have the IP address of a DNS server.
Enter the DNS server's IP address in the field to the right. If you
chose User- Defined, but leave the IP address set to 0.0.0.0, User-
Defined changes to None after you click Apply. If you set a second
choice to User-Defined, and enter the same IP address, the second
User-Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. You must
have another DHCP sever on your LAN, or else the computers must
have their DNS server addresses manually configured. If you do not
configure a DNS server, you must know the IP address of a computer
in order to access it.
Copyright © Huawei Technologies Co., Ltd.
6 Home Networking
60