Touch panel display connection (USB connection)
A USB type touch panel can be connected to a display. A touch panel allows the presenter to
conduct a smooth dynamic session by simply swiping on the screen to switch the displayed
image.
To connect a touch panel display, in addition to the HDMI connector or DISPLAY PORT
connector connection for sending video, it must also be connected via USB to transmit touch
gesture controls.
Connect the main unit and the display using a USB cable.
Third-party device driver installation
Device drivers must be installed separately for touch panel displays and other devices whose
connection is not recognized by the Windows standard driver.
For details, see "Third-party device drivers" (page 48) in the "Installing Third-Party Software"
section.
Pod
Connect between the main unit and Pods using wired LAN network connections.
Note
Enable only one Ethernet setting in [Network Connections] in the [Control Panel]. Disable
Wi-Fi, Bluetooth, and other networks.
For details about the computer setup procedure, refer to the manual supplied with the
computer.
For details about installation and operation of Pod PC Software, refer to the Help Guide.
Disconnecting/reconnecting cables
Correct operation when connecting and disconnecting cables, excluding the HDMI input
connector, during operation is not guaranteed.
Before connecting or disconnecting cables, make sure that the power supply is first turned off.
Installing Option Software
If you have already purchased a license as described in "Preparation Before Installation" (page
41), you will need the installation key obtained from your dealer.
For details about installation of option software, see "Preparation Before Installation" (page
41) and refer to the Help Guide.
47