Sony DNW-A75 Maintenance Manual page 97

C0: SERVO/DT CHECK
This submode is used to check the servo and analog DT systems.
C00-03: SERVO CHECK
This mode is used to check the servo system. For more details, refer to Section 4-2-2 (on page 4-14).
SERVO/DT CHECK
*
C00-03:SERVO CHECK
C04:ANALOG DT CHECK
Title
C00 : INPUT CHECK
C000 : CASSETTE SW
C001 : CASSETTE COMP. SW
C002 : TOP/END SENSOR
C003 : DEW SENSOR
C01 : MOTOR CHECK
C010 : S REEL MOTOR
C011 : T REEL MOTOR
C012 : THREADING MOTOR
C013 : CASSETTE COMP. MOTOR 4-21
C014 : CAPSTAN MOTOR
C015 : DRUM MOTOR
C016 : REEL POSITION MOTOR 4-24
C02 : PLUNGER SOL. CHECK
C020 : PINCH ROLLER
C021 : S REEL BRAKE
C022 : T REEL BRAKE
C023 : CLEANING ROLLER
C03 : REEL/CAPSTAN MOTOR &
FG CHECK
C04: ANALOG DT CHECK
This mode is used to check the analog DT system. For more details, refer to Section 4-2-3 (on page 4-29).
SERVO/DT CHECK
C00-03:SERVO CHECK
*
C04:ANALOG DT CHECK
Title
C060 : SG LOOP CHECK
DNW-A75/A75P
SERVO CHECK
[SET]
*
C00:INPUT CHECK
C01:MOTOR CHECK
C02:PLUNGER SOL. CHECK
C03:REEL/CAPSTAN MOTOR
& FG CHECK
[MENU]
Page Description
— Check menu of sensors (not including a part of sensors)
4-15 Checks the cassette tab and REC inhibit sensors.
4-16 Checks the cassette-in and cassette size sensors.
4-17 Checks the tape top and tape end sensors.
4-18 Checks the dew condensation sensors.
— Check menu of motors (except a fan motor) and partial sensors
4-19 Checks the S reel motor.
4-19 Checks the T reel motor.
4-20 Checks the threading motor and threading/unthreading end sensors.
Checks the cassette compartment motor and cassette-down sensors.
4-22 Automatically checks the capstan motor.
4-23 Automatically checks the drum motor.
Checks the reel shift motor and reel position sensors.
— Check menu of solenoids
4-25 Checks the pinch roller solenoid.
4-26 Checks the S reel brake solenoid.
4-26 Checks the T reel brake solenoid.
4-27 Checks the cleaning roller solenoid.
4-28 Continuous check menu of reel and capstan motors
ANALOG DT CHECK
[SET]
*
C60:SG LOOP CHECK
[MENU]
Page Description
4-29 Checks the feedback loop of the strain gauge for analog Betacam playback.
4-2. TAPE Maintenance Mode (M0)
4-2-1. Overviews
4-7