Download Print this page

ABB TPU-2000R Manual page 5

Transformer protection unit
Hide thumbs Also See for TPU-2000R:

Advertisement

Built-In Testing
The TPU-2000R continuously checks itself for proper functioning.
Self-Test Status
The TPU-2000R provides continuous self-testing of its power supply voltages, memory elements, digital signal processor
and its program execution. In the event of a system failure, the protective functions are disabled and the Self-Check
Alarm contacts are actuated. Except for a "processor stalled" condition, review the PASS/FAIL status of these self-test
elements by using the man-machine interface (MMI). Normal status is indicated by a green TPU STATUS light (LED)
and system failure is indicated by a red TPU STATUS light (or by the green TPU STATUS light not being lit in the case
of a loss of control power). If the green light is flashing, refer to the Operations Menu in Section 9.
Self-Test Failures are recorded as a number in the Operations Record. The binary bit pattern of this number indicates
the Self-Test Failure or Editor Access Status involved. The 1's in the bit pattern indicate where a failure has occurred.
Count from the right of the bit pattern (starting with zero) to the position where a "1" occurs. Compare that bit position
with Table 4-1 to reveal the failure. See the following examples for further explanation.
#
If the self-test fails, the TPU-2000R is no longer providing protection. Replace the unit as soon as possible.
Table 4-1. Operations Record Value Information
Bit Position
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Relay Design and Specifications
Self-Test Failure
CPU RAM
CPU EPROM
CPU NVRAM
CPU EEPROM
NOT USED
NOT USED
NOT USED
NOT USED
DSP ROM
DSP INTERNAL RAM
DSP EXTERNAL RAM
DSP ANALOG/DIGITAL CONVETER
DSP +/-5 V POWER SUPPLY
DSP +/-15 V POWER SUPPLY
DSP STALL or +5 V POWER SUPPLY ALARM SETTINGS EDITED
DSP TO CPU COMMUNICATIONS
ABB Transformer Protection Unit 2000R
Editor Access Status
INTERRUPT LOGGING
REMOTE EDIT DISABLE = 1
LOCAL EDIT DISABLED = 1
FRONT MMI EDIT ACTIVE
FRONT COMM PORT EDIT ACTIVE
REAR COMM PORT EDIT ACTIVE
REAR AUX COMM PORT EDIT ACTIVE
REAL TIME CLOCK EDITED
PROGRAMMABLE I/O EDITED
PRIMARY SET EDITED
ALTERNATE1 SETTINGS EDITED
ALTERNATE2 SETTINGS EDITED
CONFIGURATION SETTINGS EDITED
COUNTER SETTINGS EDITED
COMMUNICATIONS SETTINGS EDITED
#
4-9

Advertisement

loading