Table of Contents
Advertisement
14/33
Mounting, demounting and electric installation
9.2 Interfaces
Connection
XUSB
XHDMI
XCDI+tx1
XCDI+tx2
Tab. 9-3: Interfaces, ordering information on the cables, refer to
page 6
10 Mounting, demounting and electric installation
10.1 Installation notes
The CDI+ splitter is intended for the rear panel mounting.
●
Fig. 10-1: Permitted mounting position
The LED displays may not be hidden.
●
Provide the following minimum distances for sufficient cooling and mounting:
●
– 50 mm to the bottom side
– 80 mm to the upper side
– 80 mm to the front side
Lay all connecting cables in loops.
●
Use strain reliefs for the cables.
●
Bosch Rexroth AG R911400465_Edition 01
Function
USB connection to the PC for touch and USB signals, cable length of 2
m max.
HDMI input to connect to the screen output of the PC, cable length of
2 m.
HDMI ↔ HDMI connecting cable to PCs with HDMI output
●
Display port ↔ HDMI adapter cable active to the control cabinet
●
PCs of the PR and VR series
Display port ↔ HDMI adapter cable passive to the control cabinet
●
PCs of the VPB40.4 series
DVI-D ↔ HDMI connecting cable to the control cabinet PCs with
●
DVI-D output
CDI+ connection to operator display 1
CDI+ connection to operator display 2
IndraControl VAC 08.1 CDI+ Splitter
chapter 5 "Accessories" on
Advertisement
Table of Contents
