ABOUT THIS GUIDE
Introduction
The SE4750 Integration Guide discusses the theory of operation, installation, and specifications of the engine, and
how to integrate the engine into data capture devices.
NOTE This guide provides general instructions for the installation of the engine into a customer's device.
Motorola recommends that an opto-mechanical engineer perform an opto-mechanical analysis prior to
integration.
Chapter Descriptions
This guide includes the following topics:
•
Chapter 1, Getting Started
•
Chapter 2, Installation
optical, grounding, ESD, and environmental considerations.
•
Chapter 3, Specifications
•
Chapter 4, Electrical Interface
•
Chapter 5, Control Interface
•
Chapter 6, Application Notes
•
Appendix A, Register Settings
provides an overview of the engine and the theory of operation.
explains how to install the engine, including information on mounting, housing design,
provides technical specifications for the engine, including decode ranges.
includes signal information and connector drawings.
describes the SE4750's bi-directional control interface.
describes SE4750 operating modes.
provides information on register settings for the engine.