Table of Contents
Advertisement
3. Disassembly
To disassemble the display, refer to section 2, "Display Components and Disassembly Flowchart," and follow the instructions in
this chapter. To assemble the display, reverse the procedure.
3.1 Preparation
• On the workbench, place two pieces of soft material such as Styrofoam that will not damage the display body, and place the
display face down on the material. Separate the pieces appropriately according to the width of the display.
• To protect the display screen from damage, make sure that the [COVER, FRONT BEZEL] around the screen are resting on the
protective material.
• The pieces of protective material should be 100 to 150 mm wide, 700 to 800 mm long, and at least 50 mm high.
• The pieces of protective material should be 100 to 150 mm wide 700 to 800 mm long and at least 50 mm high
Styrofoam
Page 7
Advertisement
Chapters
Table of Contents
