Sony HVL-F43M Service Manual page 7

2-6. SIDE MOLD (A) ASSY, CHARGING CAPACITOR ELECTRICAL DISCHARGE PROCESSING
4 side mold (A) assy
Note 1: When installing the side mold (A) assy,
align the boss with the hole.
3 side mold tape
boss
hole
1 Pour alcohol around the side mold
(A) to weaken the adhesion of the
side mold tape.
2 Insert the tip of the tweezers in
the slit of side mold (A) assy and
scoop them.
hole
– Rear view –
i
4 side mold (A) assy
Note 1: When installing the side mold (A) assy,
align the boss with the hole.
Note 2: Two holes to discharge is visible when
removing this side mold assy.
Discharge the charging capacitor refer to
"DISCHARGING OF THE CHARGING
CAPACITOR" on page 3.
hole
hole
3 side mold tape
HVL-F43M
a i e a i a a i r
boss
7