Mesh Network Subordinate Device (Slave) - D-Link DAP-1620 User Manual

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual

Mesh Network Subordinate Device (Slave)

In order to configure DAP-1620 as a subordinate device of your Mesh network, from the
Connection method list, select the Super Mesh value. Then from the Device Role list, select
the Slave value. From the Frequency band list, select the band where your main device (in the
Master role) operates.
Then a device in the Slave role is configured in the assess point mode. In this mode you can change
the LAN IP address, set your own settings for the wireless network in the 2.4GHz and 5GHz bands,
and set your own password for access to the web-based interface of the device.
Figure 34. Configuring the Super Mesh function for a subordinate device.
Page 41 of 125
Configuring via Web-based Interface