Sony BKM-FW50 Service Manual page 26

5-4. Operation of SNMP Setting Window
Open the Web page of the Information Display in which
BKM-FW50 is inserted and press the SNMP button in the
Advanced setting item on the Setup page (where an
administrator's password is necessary). The SNMP setting
window shown on the next page is displayed.
This section describes the procedure and contents for
setting of SNMP.
SNMP Setting window (on Web Page)
5-2
5-4-1. Community
A Community name is used as the password for SNMP
access. The request received from an SNMP manager is
accepted when the Community name contained in the
request coincides with the Community name set in
Information Display. The request is rejected when the
former does not coincide with the latter.
In Information Display, a maximum of three Communities
can be set.
There are "Rights" and "Trap destinations" items in the
property of Community. The property can be set for each
set Community.
n
When multiple Communities are set, all set Communities
are validated.
1. Rights
The rights that can be set are as follows:
Read Only: An SNMP manager can reference MIB
information using this Community name.
Read Write: This Community must be set when a write
request is sent from an SNMP manager.
Other: Do not set this option because it is used for
the function extension in future.
2. Trap destinations
When Trap destinations are set, during trap occurrence, a
trap is notified to the equipment set as destinations using
the Community name set as Trap destinations.
Up to four Trap destinations can be set to one Community.
Trap destinations are not set in default.
n
This product can be set on only the Web screen because it
does not install the automatic setting function of Trap
destinations.
3. Setting procedure of Community
Community can be added, edited, and removed.
The addition, editing, and removal procedures of
Community are described below.
BKM-FW50