Advertisement
10
Charging portable devices
>
Check the voltage/current specification with your portable device before
charging the portable device.
Check manual or charger specification that you purchased portable device
or check manufacturer of portable device before you charge the portable
device.
1. Connect the USB port (Output) of the portable battery and the USB port
2. Press the LED button.
3. When charging of portable device is done, remove the USB cable.
,
• You can use the supplied USB cable with your portable device to charge.
• If not connecting a portable device to the portable battery after pressing
• In case of using BP4 10400 mAh, when you charge battery charging
10_BP405_BP302_ENG_TAY35387870.indd 10
Operation
Caution
of your portable deivce by using the USB cable.
- LEDs flashing represents current battery capacity.
Note
the LED button, the portable battery output is to be turned off about 20
seconds later. Charging mode for portable device will maintain during 20
seconds.
specification 1.0 A(or higher) portable device by using one of USB port,
the other USB port may be limited to charge devices. Therefore, when
you charge portable device, please check charging specification of
portable device.
2014-04-30
9:55:5
Advertisement
