LG Niagara Framework MultiSITE E10 Installation Manual page 6

SAFETY INSTRUCTIONS
CAUTION
Wear protective gloves when handling equipment.
Sharp edges may cause personal injury.
Note:
The information contained in this manual is intended for use by an industry-qualified, experienced, trained electrician familiar
with local, national, and regional codes and who is equipped with the proper tools and test instruments.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction or property damage.
A single, dedicated power source for each MS-E10 is recommended.
If you power mulitple MS-E10 controllers from a single power source, you must match the power and grounding polarity on each controller or the
controller will be damaged
Disconnect power before installing or servicing the unit.
There is risk of equipment damage or degraded performance.
Clean up the site after all procedures are finished, and check that no metal scraps, screws, or bits of wiring have been left
inside or surrounding the controller or indoor units.
Do not allow water, dirt, or animals to enter the controller.
There is risk of unit failure or degraded performance.
Do not spill water or other liquid on the inside of the controller.
immersed in water or other liquid, contact your local authorized LG distributor for support.
There is risk of unit failure or degraded performance.
Remove all power to controller before attaching (plug in) or detaching (unplug) any option module.
There is risk of possible equipment damage.
Do not remove the controller's cover.
No configurable or user-serviceable items (such as jumpers or a battery) require cover removal. All items are accessible as switches and connectors
on the unit's top, bottom, and side, or behind the unit's front access door.
This device is only intended for use as a monitoring and control device.
There is risk of data loss or equipment damage.
The MS-E10 Controller controller is not compatible with a Power-Over-Ethernet (POE) network.
Do not connect the controller on a network segment which carries power.
The unit may fail.
Protect against unauthorized access to your network systems by restricting physical access to this controller.
6
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Do not drop the controller into water. If the unit is
Do not use it for any other purpose.