2-8.
DPR-340 Board
Preparation
1.
Remove the top cover. (Refer to
2.
Remove the main board assembly (for CAMERA A). (Refer to
3.
Remove the main board assembly (for CAMERA B). (Refer to
(in case of removing the DPR-340 board for CAMERA B)
Procedure
1.
Remove the four screws to detach the heat sink (DPR) and radiation sheet (DPR).
B3 x 6
Heat sink (DPR)
Radiation sheet (DPR)
Bosses
Note
When installing the heat sink (DPR), fit the two bosses with the two holes.
MCC-3000MT
"2-2. Top
Cover". )
Hole
B3 x 6
"2-6. Main Board Assembly (for CAMERA
"2-7. Main Board Assembly (for CAMERA
A)". )
B)". )
2-13