Clearing A Site From The Meter; Saving Site Data In Text Form - GE DigitalFlow XGS868i Programming Manual

C.8.4 Clearing a Site from the Meter
As the XGS868i has only one site (Working) at any time, it is not possible to remove this site. To change site
parameters, first save a site to the PC (as discussed in Saving a Site to the PC on page 134), and then save the site to the
XGS868i (as discussed in Saving New Site Data to the XGS868i on page 134).
C.8.5 Saving Site Data in Text Form
To store the data from a site file as a text file for display or printout:
1. Highlight the site in the left pane. (See Figure 51 on page 133.)
[Save Site Print to PC]
2. Click on
3. The Site File Selection window (shown in Figure 52 on page 133) opens. Enter the desired site name (now with a
.prt suffix) and click on
4. Click [ ] once to close the Site File Operations window, and a second time to close the Properties window and
Close
return to the Meter Browser.
DigitalFlow™ XGS868i Programming Manual
.
. PanaView displays a text version of the site, as shown in Figure 54.
[Save]
Figure 54: Printout of Site File
Appendix C. Programming the XGS868i Using PanaView™
135