NEC SL1000 Features And Specifications Manual page 454

SL1000/SL1100
In PRG 15-07-01, do not
assign function key as
line keys.
In PRG 15-07-01, do not
I
assign Trunk Group
Access or trunk group keys.
Adjust the CODEC Gain
in PRG 14-01-02 (transmit)
and PRG 14-01-03 (receive).
In PRG 21-15-01, enter
the extension number and
enter the Trunk Group
Routing route number.
1-444
Is the amount of time the system waits before
placing the call in a talk state sufficient?
Should extension users
No have one-button placing
Should extension users have
one-button access to trunk
No
groups for placing calls?
Do you want to adjust
Trunks
Check the Analog Trunk Timers in
PRG 81-01 for compatibility with the Telco.
If desired, assign names to
trunks in PRG 14-01-01.
Do you want to set up
Stop
No
In PRG 11-09-02, assign the
Service Code set up in the
previous step for Altemate
Yes
Trunk Route Access?
Refer to the Trunk
Group Routing
feature and set up
Trunk Group
Routing.
B
Yes
Yes
of outside calls?
Yes
the gain (volume) for
trunks?
No
an Altemate Trunk Yes
Route Access Code?
Trunk Route Access.
Should extension be
able to use Altemate No
Is Trunk Group
Routing defined?
Stop
(SL1100)
ISSUE 2.0
In PRG 21-01-03, enter
No
the interval for the
trunk interdigit timer.
In PRG 15-07-01, assign
function keys as line keys.
code *01+001-96
In PRG 15-07-01, assign
line group keys (*02).
For example, to make
50 the Altemate Trunk
Route Access Code.
DIAL = 5
Digit = 2
Kind = 8
In PRG 11-01-01, set
up a Service Code for
Altemate Trunk Route
Access.
In PRG 21-15-01, enter
the extension number
and enter 0 to
prevent routing.
ISDN Compatibility