Setting the Controllers using the Front Panel
Redundant Configuration using Automatic Setting
Power-on
Controller
Controller 2 is powered-off.
Press ENT for two seconds on the front
panel of Controller 1 to enter the Main
Menu. Use t or s to navigate through
the menus. Choose "View and Edit
Peripheral
Dev.."
(View
Peripheral Devices), then press ENT.
Choose "Set Peripheral Devices Entry",
then press ENT.
Choose "Redundant Ctlr Function___",
and then press ENT. (Note: The current
setting will be displayed on the LCD. If
this controller has never been set as a
redundant controller before, the default
setting
of
the
redundant
function
is
Disabled.
"Redundant Ctlr Function Disable" will be
displayed on the LCD. Press ENT to go
to the next step.)
The message "Enable Redundant Ctlr:
Autocfg?" will appear. Use t or s to
scroll
through
the
available
("Primary," "Secondary" or "Autocfg"),
then press ENT for two seconds to select
"Autocfg."
192
1.
Make
sure
View and Edit
Peripheral Dev
Set Peripheral
and
Edit
Devices Entry
Redundant Ctlr
Function Disable
controller
The
message
Enable Redundant
Ctlr: Autocfg
options
?
User's Guide