2-9. Cleaning when the Heads are
Clogged
If the video heads are clogged, clean the heads as the
following procedure.
If the video heads are clogged after cleaning by cleaning
tape, clean them by cleaning piece.
2-9-1. Cleaning by Cleaning Tape
n
Make sure to use the cleaning tape BCT-5CLN or BCT-
D12CL. If the cleaning is performed by other cleaning tape,
not the BCT-5CLN or BCT-D12CL, unusual friction or
damage of the video head may occur.
1. Insert the cleaning tape in the unit.
2. Press the EJECT button simultaneously with PLAY
button.
Head cleaning starts.
3. After 5 seconds, the cleaning tape will be ejected
automatically.
n
Be sure to eject the cleaning tape after cleaning to avoid
damages to the heads.
4. Confirm that the head clog is clear.
2-9. Cleaning When the Heads are Clogged
2-9-2. Cleaning by Cleaning Cloth
Caution
• Turn the power off before cleaning.
• Each block in the mechanical deck consists of a precision
part and is adjusted precisely. Be careful not to damage
each part and to apply an excessive force during cleaning.
• Do not touch the greased portions during cleaning. If
grease attaches to a cleaning cloth, replace the cleaning
cloth by new one. If a cleaning cloth smeared with grease
is used, grease may attach to the places where it should
not.
• Do not insert a cassette tape before a cleaning fluid
completely evaporates after cleaning.
Tools
• Cleaning cloth : 3-184-527-01
• Cleaning fluid : 9-919-573-01
c
Do not use a cotton swab to clean the rotary heads.
2-19